PACKING RECOMMENDATIONS

Packaging

The packaging organization must comply with this document and the technical specification with the list of components provided by SM Custom packaging to the client.

The type of packaging must be used to meet the sea, air, or land transportation (domestic or international, depending on the route) for packaging.

SM Custom packaging is providing the best custom packaging for small business.

Packaging must be done in such a way as to meet the following requirements at least:

1. Preventing damage to goods;
2. Compliance with storage instructions;
3. The simplicity of loading and unloading operations;
4. Clear markings for easy identification of parts and final destination address;
5. All signs that determine the requirements for loading operations must be clear and easily identifiable;
6. For the manufacture of packaging, only high-quality materials should be used, by industry standards

The control and manufacturing quality of the packaging must be carried out by the quality assurance policy of SM Custom Packaging and its client. The procedure for controlling the quality of packaging should be carried out throughout the entire packaging procedure.

The importance of wholesale custom packaging boxes is that they can easily fit your product or any product because size, color, material, type of material such as matte, glossy, and Kraft material can be used.

Acceptance and initial inspection

1. Upon receipt of the SM Custom Packaging equipment, the product must be visually inspected for external damage during transportation.
2. Any data showing signs of damage or foreign objects must be immediately reported to SM Custom Packaging.
3. Depending on the size and weight of the material, the unloading is done with a forklift or crane.
4. When unloading, every precaution must be taken to prevent any damage.

Cleaning and preservation

1. The product must be cleaned with an appropriate tool or material to remove any possible contamination.
2. It is forbidden to use solvent or any chemical compounds in the cleaning process. This can damage equipment and components.
3. The product must be vacuum-packed by Marvel, or a similar manufacturer, with a desiccant inside. The desiccant must absorb and retain moisture inside the package.
4. Boxes should be as tightly sealed as possible and serve as an insulating material for equipment and components.

Packaging

1. The product must be packed so that the material of the boxes and boxes complies with domestic and international recommendations and guidelines for the standardization of packaging.
2. Particular attention should be paid to the shipping, packing, and transport specifications of SM Custom Packaging.
3. The lumber used in production must be new, free of knots and signs of decay.
4. Nails should be with a spiral cut for a more reliable fixation of the tree. The length of the nails is selected so that they do not go through the tree.
5. Materials should be additionally securely packed and occupy the smallest possible volume.
6. Consoles, attachments, and cabinets must be bolted and tied to the base of the boxes to ensure the safety of the equipment during transport.
7. Loose cables and wires should be laid and bundled to ensure minimum volume.

Transportation in a container

1. Materials, before packing, should be placed in boxes to ensure the best weight distribution.
2. All boxes, on both sides, must be marked with the place of delivery; they must be equipped with shock sensors, a center of gravity mark, and all standard international symbols to guarantee the complete integrity of the equipment.
3. The equipment must be secured and secured with struts to prevent any movement or displacement within the box, and must also be protected from friction, bending, scratches, and damage that may occur during transport and loading.
4. Any additional boxes must be securely fixed in the box to avoid damage to the equipment and its accessories.

Documents, Identification, and Marking

1. Each box or box is packed with packing indicating the weight, size, and a detailed list of equipment and materials packed in the box.
2. Domestic or international guidelines must mark all boxes for marking and symbols. The font must be at least 1 inch (25.4 mm) high.
3. The marking must include, as a minimum, the following information: destination, return address, post office number, loading instructions, net and gross weights, and any special instructions.
4. Check and make sure the shipping, labeling, and identification instructions match the SM Custom Packaging clients.

Drawer structure

1. The base should consist of a main supporting element extending over the entire length of the box.
2. Tie-boards should connect the load-bearing elements to provide easy gripping for handling by fork or crane equipment.
3. The deck consists of continuous planking to reinforce the rails.
4. The main structure and support of the box should consist of retaining walls attached to the bottom with nails.
5. The roof structure shall consist of a cover base resting on an upper frame at right angles to the uprights in the longitudinal direction of the box.
6. The entire box must be fully sheathed with plywood, at least 10 mm thick.
7. For extra strength, the outer surface of the box should be sheathed with an additional crate.